OEM
Sort by
Show result
  • New

  • Wide measuring range and high resolution

  • Both photoelectric and contact measuring

  • Max. value, Min. value and last value memory

  • Low battery indication

  • 6 months warranty

RM52.00
Excellent choice for hobbyist for development and prototyping work. Stripboard / Veroboard is designed primarily for hard wiring of ICs and discrete components. Stripboard / Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks.
 
Punched on 0.1" pitch (2.54mm) with 1mm diameter holes

Specification

  • Board size : 150 x 90 mm
  • Column no. : 32
  • Holes no.per column : 50
RM1.30

DT830D digital multimeter are pocket-sized 3 1/2-digit (3.5 digit) digital multimeter for measuring DC and AC Voltage, DC Current, Resistance and Diode Testing. These also provide transistor test function (hFE), squarewave signal output and performing continuity test. Overload protection and low battery indication are provided.

FEATURES

  • Resistance measurement
  • DC current measurement up to 10A
  • Continuity test with buzzer and diode test
  • Squarewave generator
  • Transistor testing (hFE)
  • Digital LCD display
  • Overload protection and low battery indication
  • Pocket-sized
  • Small multi meter for your day to day needs
  • Simple and easy
  • Low cost
  • Suitable for beginners, home usage, hobbyist and students
  • Removable Test Leads Included
  • Free 9V battery (Installed)
  • Tested before shipment
  • 6 months local supplier warranty against manufacturing defects

SPECIFICATION

  • DC Voltage : 200m / 2000m / 20 / 200 / 1000V ±0.5%
  • AC Voltage : 200 / 750V ±1.2%
  • DC Current : 200u / 2000u / 20m / 200m / 10A ±1.0%
  • Resistance : 200 / 2000 / 20K / 200K / 2000KΩ ±0.8%
  • LCD Size : 48 * 16mm
  • Maximum Display : 1999
  • Diode Test : Yes
  • Transistor Test : Yes
  • Continuity Buzzer Test : Yes
  • Protection : Overload Protection
  • Squarewave Generator Output : Yes
  • Power : 1 * 9V 6F22 battery (Included)
  • Weight : Approx. 127g
  • Size : Approx. 124 * 69 * 24mm
RM10.80

936 SOLDERING STATION SOLDERING IRON REPLACEMENT TIP 900M-T-1.2D HAKKO AOYUE SAIKE ATTEN KADA YIHUA

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD.

  • This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.
  • The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.
RM3.30

936 SOLDERING STATION SOLDERING IRON REPLACEMENT TIP 900M-T-1.6D HAKKO AOYUE SAIKE ATTEN KADA YIHUA

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD.

  • This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.
  • It can be used for any soldering work. Application examples : Soldering tiny chip parts such as 0603, Soldering chip parts, Drag soldering, Pre-tinning lead wire, Point soldering, Soldering cup terminals and Melting and removing coil coatings.
RM3.30

936 SOLDERING STATION SOLDERING IRON REPLACEMENT TIP 900M-T-2C HAKKO AOYUE SAIKE ATTEN KADA YIHUA

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD.

  • This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.
  • It is used for drag soldering and pre-tinning of lead wires.
  • Soldering work application examples : Soldering tiny chip parts such as 0603, Soldering chip parts, Drag soldering, Pre-tinning lead wire, Point soldering, and Melting and removing coil coatings.
RM3.30

936 SOLDERING STATION SOLDERING IRON REPLACEMENT TIP 900M-T-B HAKKO AOYUE SAIKE ATTEN KADA YIHUA

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD.

  • All-round type which can be used from any direction and is easy to hold at any position. 
  • Possible to solder any surface from small to large.
RM3.30

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD.

  • This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc. 
  • It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.
RM3.30

936 SOLDERING STATION SOLDERING IRON REPLACEMENT TIP 900M-T-K HAKKO AOYUE SAIKE ATTEN KADA YIHUA

Replacement soldering iron tip for Hakko, Aoyue, Saike, Atten, Kada, Yihua 936 soldering station. It also compatible with Hakko FX-888, 936ESD, 937, 928, 900M, 900M-ESD, 907, 907ESD

  • This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
  • It is used for soldering at narrow pitches, correction of bridging and drag soldering.
 
RM3.30

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

RM1.40

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

RM1.40

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

RM1.40

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

RM1.40

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

 

RM1.40

A PCB mounting, single turn preset / trimmer / variable resistor. It is easy to finger adjust with the attached knob. Suitable for boards or controller that always need human adjustment on the resistor value.

RM1.40